Warranty Package Coverage Includes:
Extension of John Deere factory comprehensive warranty for labor, and repair or replacement parts in the event your covered product fails to operate as a result of a mechanical or electrical failure caused by defects in workmanship and/or materials. At our discretion, replacement parts used in covered repairs will be either new Genuine John Deere parts or Genuine John Deere remanufactured parts or components furnished by John Deere. Free pickup and Delivery within a twenty five mile radius.

Warranty Package Coverage Does Not Include:
1) Any product used in a commercial setting or rental basis.
2) Any services not authorized by the administrator or performed by an unauthorized servicer.
3) Any Additional costs for services not specifically covered by this Agreement.
4) Incidental, consequential, or secondary damages or delay in rendering service under this Agreement or loss of use during the period that the covered product is at an authorized service center or otherwise awaiting parts.
5) Transportation, parts, or repair due to normal wear and tear and items normally designed to be periodically replaced by the purchaser during the covered product’s life, including but not limited to blades, belts, batteries, light bulbs, hoses, etc.; loss or damage caused by war, invasion, or act of foreign enemy, hostilities, civil war, rebellion, riot, strike, labor disturbances, lockout, or civil commotion; damage from accident, abuse, misuse, mishandling, introduction of foreign objects into the covered product, failure to follow the manufacturer’s instructions, and external causes including third party actions, fire, theft, insects, animals, exposure to weather conditions, lightning, windstorm, sand, dirt, hail, earthquake, flood, water, acts of God or consequential loss of any nature.
6) Nonfunctional or aesthetic parts, including but not limited to plastic parts, knobs, rollers, baskets, scratches, peeling, and dents.
7) Accessories or attachments used in conjunction with a covered product, other than mower decks used on lawn tractors, lawn and garden tractors, and commercial mowers.
8) Service where no problem can be found.
9) Breakdowns that are not reported within the terms of this Agreement.

Maintenance Package Includes:
Worry free maintenance plan, complete service, free pickup and delivery within a twenty five mile radius.

Maintenance plan includes services listed below:

1) Change Engine Oil and Filter

2) Change Air Filter and Pre-Cleaner

3) Change Spark Plugs

4) Change Fuel Filter

5) Check Transmission Oil, if applicable

6) Check Engine Coolant, if applicable

7) Change Hydraulic Filter

8) Sharpen Blades

9) Check Safety Systems

10) Level Mower Deck

11) Check and Adjust Tire Pressure

12) Check Wheel Bolts

13) Check and Tighten Loose Hardware

14) Check Engine Cooling Fins

15) Check Battery

16) Check Electrolyte Level and Battery Voltage

17) Clean Radiator Fins and Air Intake Screens

18) Clean Under Mower Deck

19) Lubricate Front Axle Pivot

20) Lubricate Front Spindles

21) Lubricate Front Wheel Bearings

22) Lubricate Mower Spindles

23) Lubricate Mower Gage Wheels

24) Check Belts and Mower Adjustments

We will provide transportation, labor, and repair or replacement parts in the event your covered product fails to operate as a result of a mechanical or electrical failure caused by defects in workmanship and/or materials. At our discretion, replacement parts used in covered repairs will be either new Genuine John Deere parts or Genuine John Deere remanufactured parts or components furnished by John Deere.

Maintenance Coverage Does Not Include:
1) Any services not authorized by the administrator or performed by an unauthorized servicer.
2) Any Additional costs for services not specifically covered by this Agreement.
4) Incidental, consequential, or secondary damages or delay in rendering service under this Agreement or loss of use during the period that the covered product is at an authorized service center or otherwise awaiting parts.
5) Transportation, parts, or repair due to normal wear and tear and items normally designed to be periodically replaced by the purchaser during the covered product’s life, including but not limited to blades, belts, batteries, light bulbs, hoses, etc.; loss or damage caused by war, invasion, or act of foreign enemy, hostilities, civil war, rebellion, riot, strike, labor disturbances, lockout, or civil commotion; damage from accident, abuse, misuse, mishandling, introduction of foreign objects into the covered product, failure to follow the manufacturer’s instructions, and external causes including third party actions, fire, theft, insects, animals, exposure to weather conditions, lightning, windstorm, sand, dirt, hail, earthquake, flood, water, acts of God or consequential loss of any nature.
6) Nonfunctional or aesthetic parts, including but not limited to plastic parts, knobs, rollers, baskets, scratches, peeling, and dents.
7) Accessories or attachments used in conjunction with a covered product, other than mower decks used on lawn tractors, lawn and garden tractors, and commercial mowers.
8) Service where no problem can be found.

17.5-hp (13.0-kW) engine

Engine oil filter and fuel filter

A 17.5-hp (13.0-kW), single-cylinder engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

• Electronic ignition for fast starts
• Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
• Cast-iron cylinder liner for long engine life
• Overhead valves for excellent power and fuel economy
• Anti-vibration system
• Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life, and extending the time between oil changes
  • More effective when operating the tractor on an incline
• Large fuel filter for trouble-free operation

No-tools oil drain valve

The no-tools oil drain valve is easy to access when changing engine oil.

Fuel tank

Convenient fuel filler opening

• The capacity is 2.4 U.S. gal. (9.1 L).
• The fuel filler opening is conveniently located under the seat.
  • Filling the tank without spilling is easy.
  • A tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapors inside the tank.

Solid one-piece frame

Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
• One-piece, steel fender deck is bolted to the frame.

Cast-iron front axle will not bend

Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
• Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
• Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

Front bumper

Front bumper

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

• Additional front-end protection
• Attractive, bold style

CargO Mount™ system makes installation of rear bagger and other attachments easy

Rear CargO Mount points

Front CargO Mount points at the top of the dashboard

Rear bagger is mounted with CargO Mount points

Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

S140 Tractor with front blade, weights, and tire chains

S160 Tractor with snow blower, weather enclosure, weights, and tire chains

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

• 44-in. (112-cm) Snow Blower
• 46-in. (117-cm) Front Blade
• Tire chains or TerraGrip traction belts
• Weather enclosure
• Weights

Two-pedal speed/direction controls

Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Hydrostatic transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

• Tuff Torq TLT200 – S100, S110, S120, S130, S140, and S160
• Tuff Torq K46 – S170 and S180

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Comfortable operator station, right side

Comfortable operator station, left side

The operator station is designed for operator comfort and easy operation:

• Controls are positioned where they are easy to reach and easy to use to control the tractor.
• Steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
• Seat is positioned to provide the most comfortable operator position.

Steering wheel and dash

Wide footrest with debris channels

Controls are easy to see and use:

• Large, three-spoke steering wheel for greater operator comfort and control
• Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

• The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
• Debris-removing channels help keep the footrest area clean and dry.

Comfortable seat

Easily adjusted seat and beverage holder

The operator seat has an 11-in. (28-cm) back height. It can be easily adjusted forward or rearward while the operator is in the seat, with seat travel of 5.5 in. (14 cm) and 10 different positions.

A beverage holder is located on the right-side fender for operator convenience.

Seat springs give a smoother ride

Seat tilted forward

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

Seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Storage compartment and beverage holder

A storage compartment and beverage holder on the right-side fender are conveniently located and easy to use.

NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.