Engine power | 25.5 hp 19 kW |
|||
---|---|---|---|---|
Oil change | No-tools oil drain with replaceable filter | |||
Engine manufacturer/model | FS730 EFI | |||
Transaxle type | K72 hydrostatic integrated with transaxle | |||
Transaxle control | Twin Touch™ pedals | |||
Rear tires | 24×12-12 HDAP | |||
Lift system type | Hydraulic | |||
Cutting width | Accel Deep™ mower deck, 54 in. 137 cm |
|||
U.S. warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Power | 25.5 hp 19 kW |
|||
---|---|---|---|---|
Displacement | 44.3 cu in. 726 cc |
|||
Manufacturer/model | FS730 EFI | |||
Type | Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter | |||
Cylinders | V-twin, cast-iron liners | |||
Governor | Constant-speed electronic throttle control | |||
Choke/speed control | No choke required | |||
Cooling method | Air | |||
Air cleaner | Dry, replaceable with foam precleaner | |||
Oil change | No-tools oil drain with replaceable filter |
Type | Gasoline | |||
---|---|---|---|---|
Fuel delivery | Open-loop electronic fuel injection (EFI) | |||
Fuel gauge | Gauge on dash | |||
Fuel tank location | Rear | |||
Fuel fill opening | On left fender, 3 in. 7.6 cm |
|||
Fuel tank capacity | 4.4 U.S. gal. 16.7 L |
Battery | 12 V 500 CCA |
|||
---|---|---|---|---|
Charging system | Flywheel alternator, regulated, 15 amp | |||
Engine starter | Solenoid shift | |||
Hourmeter | Yes | |||
Headlights | Two standard, incandescent, 27 W | |||
Taillights or reflector | Reflectors | |||
Backup lights | No | |||
Rear work lights | No | |||
12-V outlet | Yes |
Type | K72 hydrostatic integrated with transaxle | |||
---|---|---|---|---|
Control | Twin Touch™ pedals | |||
Cruise control | Yes, button on dash | |||
Oil cooler | Fins and fan on transaxle | |||
Oil filter | Yes, replaceable | |||
Differential lock | Standard | |||
Forward speed | 0-7.2 mph 0-11.6 km/h |
|||
Reverse speed | 0-5.2 mph 0-8.4 km/h |
|||
Brakes | Internal wet disc |
Frame | Welded heavy-duty | |||
---|---|---|---|---|
Primer/paint | E-coat/powder | |||
Weight bracket | Standard front and rear – each holds up to four Quik-Tatch weights, 42 lb 19 kg |
|||
Receiver hitch | No | |||
Front axle | Cast iron front axle, front wheel ball bearings | |||
Spindle bushings | Metal, replaceable | |||
Front tires | 16×6.5-8 turf | |||
Rear tires | 24×12-12 HDAP | |||
Hood material | Fully enclosed, molded-in color material reduces sound, will not rust or dent | |||
Fender deck material | Stamped steel | |||
Floor mats | Sure-grip rubber | |||
Storage | Yes, under seat and covered toolbox | |||
Service interval decal | Yes | |||
Fender handles/grips | Handles | |||
Cup holder | Yes | |||
Equipment mounting | Yes, heavy duty |
Type | Power, hydraulic | |||
---|---|---|---|---|
Four-wheel steer | Not available on this model | |||
Steering wheel | 14 in. 35.6 cm |
|||
Tilt steering wheel | Standard, five position | |||
Turning radius | 22 in. 55.9 cm |
|||
Uncut circle radius | 24 in. 61 cm |
Type | Cut-and-sewn high-back | |||
---|---|---|---|---|
Seat back height | 21 in. 53 cm |
|||
Armrests | Optional | |||
Fore-aft adjustment | While seated, slide rail, 15-position, 6.6 in. 17 cm |
|||
Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
Type | Hydraulic | |||
---|---|---|---|---|
Hydraulic outlets | No | |||
Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
|||
Cut height increments | 0.25 in. 0.64 cm |
|||
Preset cut height | Yes |
Type | Side discharge | |||
---|---|---|---|---|
Cutting width | Accel Deep™ mower deck, 54 in. 137 cm |
|||
Construction | Stamped steel deck shell | |||
Mower deck material | 10 gauge 0.135 in. 3.4 mm |
|||
Mower wash port | Yes | |||
Mower drive system | Electric power take-off (PTO) clutch, in-line belt | |||
Mower wheels | Four | |||
Mower wheel adjustment | Seven-position, spring-loaded pin | |||
Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Type | Roll under tractor | |||
---|---|---|---|---|
Front draft arms | Attached with spring pins at two points | |||
Rear draft arms | Quick-pull pins | |||
Mower wheels rotate | Yes, 90 degrees for easy mower removal | |||
Drive system | Dual belt |
Meets ANSI standard | Yes | |||
---|---|---|---|---|
Meets OPEI standard | Yes | |||
Backup protection | Reverse Implement Option (RIO) | |||
Safety video | Yes |
Notes | Heavy-duty garden tractor transaxle Convenient power steering and hydraulic lift Built-in front and rear weight brackets |
|||
---|---|---|---|---|
Warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |