simple

975 Reversible Plow

  • Moldboard frame pivots with the bottoms
  • Safety-trip standards available to save time
  • Plastic moldboard and steel shins
  • Rear gauge wheel

Request More Information - New Equipment

975 mainframe

All 975 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms

Reversing pin

The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.

The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:

  • 5-mm (3/16-in.) thick on three-bottom plows
  • 8-mm (5/16-in.) thick on four- and five-bottom plows

Integral in-furrow hitch

Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:

  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth is 356 mm (14 in.)

Adjustable width of cut

The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes in order to:

  • Match the tractor horsepower to the soil conditions
  • Improve the residue-handling ability
  • Improve productivity
  • Maximize fuel efficiency

The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.

975 Moldboard Plow rear gauge wheel

All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:

  • Controls the plowing depth of the rear of the plow in rolling terrain
  • Stabilizes rear of the plow in soft soils
  • Adjustable through a full range of plowing depths
  • Designed for easy turnbuckle adjustment
  • Equipped with 6.70-15 tire to eliminate bulldozing in soft soils
  • Moldboard frame pivots with the bottoms
  • Safety-trip standards available to save time
  • Plastic moldboard and steel shins
  • Rear gauge wheel

Key Specs

Total width of cut
Option 1
0.63 to 0.91 m
2.67 to 3 ft
Option 2
1.2 to 1.4 m
4 to 4.42 ft
Option 3
1.6 to 1.8 m
5.25 to 6 ft
Option 4
2.0 to 2.3 m
6.5 to 7.42 ft
Plowing depth
35.6 cm
14 in.
Horsepower required – Option 1
2-bottom: 37.3-52.2 kW
50-70 hp
Option 2
3-bottom: 52.2-70.8 kW
70-95 hp
Option 3
4-bottom: 70.8-104.4 kW
95-140 hp
Option 4
5-bottom: 96.9-123 kW
130-165 hp

Hitch

Type
Category 3N, 3, or 2
Steering
Integral, in-furrow
Yes
Integral, on-land
No
Semi-integral, on-land
No
Drawn, in-furrow
No
Drawn, on-land
No
Quick-coupler compatible
Yes
Reversible
Type of reversing
Hydraulic cylinder
Yes

No. of bottoms

Option 1
2
Option 2
3
Option 3
4
Option 4
5
Option 5
Option 6
Option 7
Option 8

Total width of cut

Adjustment
Manual
Option 1
0.63 to 0.91 m
2.67 to 3 ft
Option 2
1.2 to 1.4 m
4 to 4.42 ft
Option 3
1.6 to 1.8 m
5.25 to 6 ft
Option 4
2.0 to 2.3 m
6.5 to 7.42 ft
Option 5
Option 6
Option 7
Option 8

Weight (approximate)

Option 1
408 kg
900 lb
Option 2
544 kg
1,200 lb
Option 3
771 kg
1,700 lb
Option 4
1,043 kg
2,300 lb
Option 5
Option 6
Option 7
Option 8

Clearances

Vertical
81.3 cm
32 in.
Fore-aft

Standards

Shearbolt
Standard
Safety trip
Optional
Spring reset
No
Hydraulic
No

Coulters

Option 1
Option 2
Option 3

Bottoms

Option 1
Plowing depth
35.6 cm
14 in.
Steel moldboard
Option 2
Plastic moldboard
Option 3
Option 4
Option 5
Option 6

Frame

Option 1
Thickness for 2- or 3-bottom: 15.2×10.2×0.478 cm
6x4x0.188 in.
Option 2
Thickness for 4- or 5-bottom: 15.2×10.2×0.64 cm
6x4x0.25 in.
Option 3
Expandable

Horsepower required

Option 1
2-bottom: 37.3-52.2 kW
50-70 hp
Option 2
3-bottom: 52.2-70.8 kW
70-95 hp
Option 3
4-bottom: 70.8-104.4 kW
95-140 hp
Option 4
5-bottom: 96.9-123 kW
130-165 hp

MYGREENWAY

Order parts, view your invoices, or request equipment services.

portal login

Customer Support

We’ve opened a Customer Contact Center to help you with all your Greenway needs!

Call (888) 237-7447
Powered by SIEQ