• See, target & kill in-season weeds using advanced cameras & machine learning
• Select targeted or broadcast applications
• Save on non-residual herbicide use
• Reduce water usage & tender stops
• Reduce crop stress & improve yields
• Delivers results operating at speeds up to 12 mph

• Premium nozzle control option to reduce over-application, crop burn & off-target drift
• AB Nozzle Switching automatically switches between different nozzle sizes to maintain spray volume and consistent spray pressure with varying speeds
• Individual Nozzle Control means every nozzle is controlled separately to ensure applications are more accurately controlled
• Cover up to 20 more acres per hour (based on a 2-mph increase in operating speed) with more consisten spray deposition
• Save 2-5% on herbicides & pesticides*

• Offers a step up from Section Control, allowing for more precise application
• Section size reduced to individual nozzle turrets
• Turn compensation by individual nozzle
• 15-Hz single pulse-width modulation (PWM)
• Combination of proven existing standard flow hardware with increased capability
• Compatible with pressure recirculation & product reclaim

• Designed for high-viscosity & suspended solid fertilizers & chemicals
• Allows accuracy of nozzle control down to the individual nozzle, helping reduce overlap & over-spraying, reducing overall chemical usage & over application
• Utilizes the John Deere five-position high-flow nozzle body
• Flow is controlled by a ball valve & powered open & closed by a small electric actuator on each nozzle
• Section width equivalent to the nozzle spacing when used with John Deere Section Control
• Compatible with pressure recirculation & product reclaim

• Pressure recirculation pushes product through the sprayer booms with a three-way valve, keeping solution from settling & delivering a consistent product to every nozzle
• Product reclaim pushes air through the sprayer lines & moves the solution back into the center feed tank
• Save product with pressure recirculation – up to 30 gallons per boom prime post boom purge*
• Spray mixture continually circulating prevents residue build-up that can cause contamination
• Save up to $600 a day* with pressure recirculation 10 times a day, coupled with approximately 22.5 gallons of solution savings with product reclaim one to two times per day
• Reduce crop damage from residual chemical buildup
• No tank modifications are needed

*Assumes 30 gallons of residual product in the system at 10 gal/acre & $20 per acre 10 times per day. Please adjust the calculation to suit your operation.

Vehicle Work Lighting Package

• 20 LED lights added to the hood, cab roof, boom cradles, left-hand platform, fill station & right-hand fuel tank

Boom Lighting Package

Tip Edge Light

• Illuminates a line on the ground aligned with end of the boom
• Installs on left-hand & right-hand boom tips
• Compatible with 90-ft, 100-ft, or 120-ft steel booms
• Compatible with fence row nozzles & foamers

Spray Pattern Illumination

• Located on inside of inner wings
• Faces outward
• Can be used with ExactApply™ spray pattern lighting

• Increasing boom length covers more ground in a single pass, helping improve acres covered per day
• Going from 90-ft to 120-ft booms could see an overall improvement of 135 acres accomplished in a day
• Boom extensions allow 90-ft & 100-ft existing booms to be upgraded to 120-ft steel booms
• Kits include new inner, outer & breakaway sections
• Both wings come from the factor assembled, helping reduce installation time.

• Offers a 22% greater spray accuracy & five-time increase in the amount of time the boom maintains its target height (compared with the previous BoomTrac Pro system)
• Inertia-monitoring sensor helps correct chassis roll
• Helps ensure accuracy in product application & reduces drift, even in hilly or rough conditions
• Requires BoomTrac Pro system, if not already installed, in order to operate