DH53 Series Offset Disks

  • Adjustable disk blade scrapers
  • Rear hitch for attaching additional implement
  • Transport locks secure disk wings
  • Oil bath tapered roller bearings minimize maintenance

Request More Information - New Equipment

Scrapers clean disk blades

Scrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Clevis hitch makes hookup easy

Clevis hitch is built strong for tough jobs

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.

Available in notched disk blades for front and rear

Notched disk blades available in three sizes

Disk blades on the DH53 Series Offset Disks are available in 71.1-cm, 76.2-cm, or 81.3-cm (28-in., 30-in, or 32-in.) diameter. The weight per blade on these disks ranges from 152.9 kg to 241.8 kg (337 lb to 533 lb) for superior penetration in tough soil conditions.


Only notched disk blades for front and rear are available on the DH53 Series models.

Keeping gangs tightened increases wear life

Gang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life. 


Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.  

Minimal maintenance increases work hours

Sealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Allows operator to pull an additional implement

A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag. 

Transport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.

Control arms level in ground and during transport

Easy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

  • Adjustable disk blade scrapers
  • Rear hitch for attaching additional implement
  • Transport locks secure disk wings
  • Oil bath tapered roller bearings minimize maintenance


3.4 m
11 ft
Ground clearance with base blades
22.9 cm
9 in.
Wheel hub bearings
Dual Tapered Roller Bearings


Approximate working width
3 m
10 ft
Maximum penetration
22.9 cm
9 in.


3866.9 kg
8525 lb
Weight per disk blade
203.7 kg
449 lb

Tractor requirements

Recommended PTO hp range
105-132 kW
141-176 hp
Recommended drawbar hp range
89.5-111.9 kW
120-150 hp


Single Offset Rigid
Tube size
15.2×15.2×0.95 cm
6 x 6 x 3/8 in.


Front hitch type
Bolt-on rear hitch

Disk blades

30.5 cm
12 in.
Notched (front) Notched (rear)

Blade concavity
Standard: high
Optional: low

Available blade sizes

Blade option one
711×9.5 mm
28×0.375 in.
Blade option two
762×9.5 mm
30×0.375 in.
Blade option three
813×9.5 mm
32×0.375 in.
Blade option four
Blade option five
Blade option six

Disk gangs

Front angle
2 Positions
Rear angle
2 Positions
Furrow fillers
Axle size
6.4 cm
2.5 in.
Axle material
Round Heat Treated Alloy Steel Threaded on Both Ends
Bearing type
Oil Bath Tapered Roller
Bearing wear plates
Bearing standards
Welded, Reinforced

Lighting and safety

Safety tow chain


Implement – Quantity of 4
12.5L x 15 10 ply in.
Wheel hub type
8 Bolt


Order parts, view your invoices, or request equipment services.

portal login

Customer Support

We’ve opened a Customer Contact Center to help you with all your Greenway needs!

Call (888) 237-7447
Powered by SIEQ