Planter Precision Upgrades

• Maintain accurate seed placement at speeds up to 10 mph
• Industry exclusive BrushBelt™ uniformly carries seed from the meter to the tench, reducing seed roll in the furrow
• Dual 56-volt electric motors provide infinite seed placement
• 20% improvement in population accuracy with curve compensation
• Compatible with ExactShot™
• Unlocks additional optional features like Easy Adjust row cleaners, Individual Row Hydraulic Downforce & pneumatic closing wheels
• Exclusive upgrade: 1.6 bu or 2.7 bu hoppers available for non-CCS planters

• Lowest entry cost for electric drive planter upgrades
• 20% improvement in population accuracy with curve compensation
• Unlocks additional features like Easy Adjust row cleaners, Individual Row Hydraulic Downforce & pneumatic closing wheels
• Fewer mechanical parts compared to ExactEmerge
• Seed tube accuracy starts to diminish as field speed exceeds 5 mph in most conditions
• More efficient and precise motor than mechanical or hydraulic drive planters
• Individual row population control enables more precise prescriptions for variable rate seeding

• Controls the downforce of each row unit independently to maintain consistent depth in changing field conditions
• Increase even plant emergence due to increased contact of the row unit to the ground
• Consistently place seed at desired depth regardless of soil conditions
• Closed loop downforce system reacts quickly on an individual row basis to changing soil conditions
• Adjusts downforce up to 5 times per second with ability to change the downforce up to 100 lbs per second
• 58% faster than pneumatic systems

• Save up to 60% of in-furrow nutrient input costs
• Using advanced technology, ExactShot™ delivers a dose of starter fertilizer only where needed
• Switch between Dosing & Continuous mode from cab
• Apply nutrients directly on seed where they are used most efficiently
• In-furrow option only
• Easy to setup, monitor & change rates using G5 display

• ExactRate™ Liquid Fertilizer System applies nitrogen during each planting pass
• Average of 4.3% (up to 12%) reduction in input (fertilizer) costs
• Performance up to 10 mph
• Variable rate prescriptions
• Fully integrated into Generation 4 display
• Turn compensation
• Row-by-row section control
• Flow detection
• As-applied documentation
• In-furrow or 2×2 application methods available

• Live camera feed into actual planter furrow, streamed on tablet in cab
• Validate seed depth accuracy across planter sections
• Ability to slow, pause & rewind live stream to review
• Adjust row cleaners & downforce based on observations without leaving the cab

• Redistributes weight to wings where it can be used to increase downforce on row units
• Reduces compaction in center section of CCS planters
• Factory-ready solution available for planters that chose the “less” option when ordering from factory
• Bolt-on solution available for planters that did not have a Frame Weight Distribution option when ordered from the factory

• Reduces overall footprint & compaction in center section of CCS planters
• Replaces existing tire with new Firestone VF
• ISOVT connection allows operators to change tire pressures from cab
• Inflate tires to road pressure in as little as 4 minutes*
• Deflate tires to field pressure in as little as 2 minutes, 20 seconds*

*This is based on field testing of a prototype design. Inflation time approximately 10 psi/min. Deflation time approximately 17.4 psi/min

• LED Lights match the color temperature used in the lighting for Premium & Ultimate Visibility packages on John Deere Tractors
• Lights mounted on the front of the hitch to fill the area between the tractor & the planter, accommodating tractors that may not have enough lighting to fill this void
• In-tank mounting for full tank illumination for seed level monitoring
• Added illumination under the bar on each row-unit for better detection of obstacles, plugs & more
• Added illumination to the ends of the planter bar for better visibility around the entire machine
• Robust rear lighting enables in-field planting quality audits & in-cab monitoring
• Improved visibility during row-unit service