simple

SW21 Series Rotary Brooms

  • Angling degree range
  • Brush diameter is 32 inches for big jobs
  • Optional dust suppression system
  • Optional gauge wheel kit for setting height

Request More Information - New Equipment

Angle to the left or right

The loader-mount hydraulic rotary broom has an angling range from 0 to 23 degrees both left and right. Setting the angle allows for the windrowing of material off of surfaces.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

Brush is large enough for tough jobs

The 83-cm (32-in.) diameter brush is large enough for the toughest jobs.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

SW21 Series dust suppression system

227-L (60-gal.) tank

The optional dust suppression system consists of a 227-L (60-gal.) tank supplying water up the nozzles that are positioned in the front of the broom.

 

The nozzles are easily controlled by a toggle switch located by the height hitch lever.

 

NOTE: Requires the poly and steel deflector kit. Compatible with lawn dethatching kit.

For setting surface height of broom (shown with dethatching kit installed)

Gauge wheels shown in rear park stand mounting tubes

An optional pair of gauge wheels are available for setting the height of the broom for limited surface contact. This ensures easy operation when sweeping surfaces or dethatching lawns.

 

It includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

A steel and rubber dust deflector kit directs material downward when using the SW21 Series Loader-Mount Rotary Brooms.

The dust suppression kit includes 227-L (60-gal.) water tank, electric pump, nozzles, hoses and fittings, electrical harness with switch, and installation instructions for SW21 Series Loader-Mount Rotary Brooms. 

 

NOTE: Requires the steel/rubber dust deflector kit.

Gauge wheels with dethatching and dust suppression kit installed

The gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

 

NOTE: By mounting wheels in front of the brush with the dethatching bracket installed, better control of ground pressure can be achieved.

Lawn dethatching kit components

The lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms improves control of ground pressure when dethatching and perfomring general sweeping by moving the gauge wheels in front of and closer to the brush. The kit includes support components, hardware, and installation instructions. The gauge wheel kit is required and sold separately. It is compatible with the dust suppression kit. 

The 50/50 poly and steel wafer brush replacement kit for the SW2160, SW2172, and SW2184 Loader-Mount Rotary Brooms includes the required quantity of wafers to replace the entire brush.

  • Angling degree range
  • Brush diameter is 32 inches for big jobs
  • Optional dust suppression system
  • Optional gauge wheel kit for setting height

Dimensions

Machine length
175 cm
69 in.
Machine width
244 cm
96 in.
Power pack width
97 cm
38 in.
Machine height
87 cm
34.25 in.
Power pack height
132 cm
52 in.

Weight

Machine operating
417 kg
920 lb
Power pack operating
243 kg
535 lb
Machine shipping
561 kg
1237 lb
Power pack shipping
243 kg
535 lb

Tractor compatibility

PTO minimum horsepower
26.1 kW
35 hp
PTO, rpm
540 rpm
Loader, current John Deere series
400

Brush

Standard bristle materials
Diameter
81 cm
32 in.
Number of brush wafers
46
Poly
Optional bristle material
Diameter
81 cm
32 in.
Number of brush wafers
46
Combination (poly/wire)

Operation

Working width
213.36 cm
84 in.
Working width at max angle
195.58 cm
77 in.
Brush speed, rpm
200 rpm

Angling

Angling range degrees, left, center, right
23, 0, 23 degree (angle)
Shear pin protection
Standard
Angling method
Hydraulic

Gauge wheels

Standard
Optional
Material
Solid
Location, front, rear
Front
Size, diameter
89×254 mm
3.5×10 in.
Adjustable height range
Total: 190.5 mm
7.5 in.
Underground level: 63.5 mm
2.5 in.
Quantity

Hydraulics

Operating pressure
207 bar
3000 psi
Flow required at operating pressure
61 L/min
16 gpm
Power pack reservoir
57 L
15 gal.
System capacity
64 L
17 gal.

Construction

Hood thickness
0.19 cm
0.0747 in.
Side frame construction
0.48 cm
0.1875 in.

Miscellaneous

Parking stands standard with unit, quantity
Four
Hydraulic protection (relief valve)
Standard
Dust deflector
Optional
Dust suppression system (60-gal. water tank)
Optional
Brackets for de-icer optional system
Standard

Shipping

Configuration
Wood crate
Units per crate
One

MYGREENWAY

Order parts, view your invoices, or request equipment services.

portal login

Customer Support

We’ve opened a Customer Contact Center to help you with all your Greenway needs!

Call (888) 237-7447
Powered by SIEQ