simple

RB23 Series Rear Blades

  • Tubular steel crafted frame
  • Reversible cutting edge
  • Optional end plates
  • Optional skid shoes

Request More Information - New Equipment

Tubular steel frame

The tough, tubular steel frame on Frontier™ RB Series Rear Blades is perfect for grading. Its full-radius moldboard more than handles landscaping needs.

 

NOTE: This applies to all RB Series Frame except the RBL Series.

Rear blade connected to tractor

Hitch on RB23 Rear Blade

The Frontier™ RB23 and RB24 Series Rear Blades are Quik-Coupler compatible with Category 2 hitches, allowing a quick, efficient hookup.

Adjustable turntable for 360-degree turning radius

The turntable on the Frontier™ RB22, RB23, and RB24 Series Rear Blades allows a complete 360-degree turning radius for leveling perfection.

 

Manually adjusting the offset, angle, and tilt allows the blade to adapt to a variety of conditions and provides added protection and leveling perfection.

Frontier™ rear blade cutting edge

All Frontier RB Series Rear Blade cutting edges are reversible, featuring bevels on both edges to give the blade twice the work life.

End plate option on RB24 Rear Blade

End plate option on RB24 Rear Blade

End plates on RB23 Rear Blade

End plates allow Frontier™ RB Series Rear Blades to hold more material while dragging it from place to place. This is ideal for leveling uneven terrain.

 

Each of the field conversion kits are for a pair of end plates and prevent the blades from windrowing material when backfilling or leveling.

Figure 1 Shown on RB24 Series

Skid shoes increase the life of the cutting edge on all RB Series Rear Blades and avoid damaging the work surface while cleaning corrals or plowing snow.

 

NOTE: Skid shoe style shown in image above used with RB2060, RB2072, and RB2084 models.

 

The skid shoe kits include one pair and allow the blade to ride on the shoes at a set height to allow the operator control of the blade depth.

 

The bundles listed below identify the rear blades they fit.

Hydraulic cylinder on RB23 Rear Blade

The field-conversion hydraulic cylinder kit includes one cylinder. This kit allows the operator to position the blade without having to get off of the operator’s station. 

 

NOTE: A rear selective control valve (SCV) is required.

  • Tubular steel crafted frame
  • Reversible cutting edge
  • Optional end plates
  • Optional skid shoes

Dimensions

Width in working position
3.0 m
10 ft
Moldboard length
304.8 cm
120 in.
Moldboard height
48.3 cm
19 in.
Moldboard thickness
0.8 cm
0.3125 in.

Weight

Machine
589.7 kg
1,300 lb
Shipping per unit
615.5 kg
1,357 lb

Tractor requirements

PTO hp (kW)
Maximum: 2WD: 89.5 kW
120 hp
Maximum: 4WD: 82 kW
110 hp
Hydraulic offset kit (hoses and fittings included)
Up to three hydraulic remotes required

Angle, tilt, offset, pivot

Pivot angle degrees
360 degree (angle)
Angle forward, number of positions
Three positions each side, up to 45 degree (angle)
Angle reverse, number of positions
Three positions each side, up to 45 degree (angle)
Tilt positions/degrees
Three positions, up and down, up to 23 degree (angle)
Offset position left or right
0 to 48.26 cm
0 to 19 in.

Hitch

Type
Category 2
Quick hitch compatibility
ASAE Category 2 quick coupler

Reversible cutting edge

Thickness
1.3 cm
0.5 in.
Height
15.2 cm
6 in.

MYGREENWAY

Order parts, view your invoices, or request equipment services.

portal login

Customer Support

We’ve opened a Customer Contact Center to help you with all your Greenway needs!

Call (888) 237-7447
Powered by SIEQ